Installation for Windows 2000
=============================
(for version 25f and higher)

Note:

  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  IMPORTANT !!!

  Only controller(s) described in installation .INF file will be visible
  through standard Device Manager.
  ALL other IDE controllers may become invisible, or listed as unknown 
  devices, or system will report resource conflicts, but WILL WORK.
  UniATA setup also disables PciIde port driver to be able to operate with
  onboard (Native Mode) controllers. This makes IDE Primary and Secondary 
  channels to disappear from Device Manager.

  In order to install UniATA for some newer controller, you may add
  entries in device list in uniata2k.inf.
  Add line before ';DEVLIST' and type there something like this:
    %PCI\VEN_$VV$&DEV_$DD$.DeviceDesc%=uniata_Inst, PCI\VEN_$VV$&DEV_$DD$
  where $VV$ is 4-digit hexedecimal VendorID of controller and
  $DD$ is 4-digit hexedecimal DeviceID of controller.
  Many BIOS'es shows this information at boot-up time, but is you have
  some other BIOS, it is possible to use some PCI enumeration utility
  (for ex. from http://alter.org.ua/soft/win/ntpcidump/index.php).
  PS. this will be automated in future.

  Another way is setup_w2k.bat

Installation steps:

1.  unpack archive (for ex. C:\temp\uniata)
2.  My Computer -> Properties -> Hardware -> Device Manager
3.  select device, chose it's
       Properties -> Driver

    Note:
    IDE controllers may be listed no only in 'IDE controllers'
    section, but in 'SCSI and RAID controllers' or 'Other devices'.

4.  Update Driver -> Next
5.  (*) Search for a suitable driver for my device (recommended)
    ( ) ....
6.  Next
7.  [ ] Floppy disk drives
    [ ] CD-ROM drives
    [v] Specify a location
    [ ] Microsift Windows Update
8.  Next
9.  enter path to .INF file for new driver (C:\temp\uniata\Release_Dist\uniata2k.inf)
10. OK

11. !!! IMPORTANT !!!
    You MUST chose the following checkbox:

    [v] Install one of the other drivers

12. Next
13. chose in the list of available drivers the following line:

      SCSI and RAID controllers | AlterWare | .......

    the keyword here is 'AlterWare' in Provider column

14. say 'Yes' for the question about missing digital signature.
    (YES, we want to continue the installation)
   
15. REBOOT your computer

